Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port on the Mercedes GLK

Model: Mercedes Glk MK 1 - Years 2008-2015
Part: Dashboard

If you own a Mercedes GLK and want to find the OBD port to connect a diagnostic tool and resolve any ECU errors, just follow the steps in this guide. It only takes a few seconds. First, get into the driver's seat and ensure the car is off. Next, locate the small cover on the lower left side of the dashboard. Once found, open it, and you will finally have access to the OBD port you were looking for. Don't forget to close the protective cover afterwards.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Front Bulbs on a Mercedes GLK
How to Replace Front Bulbs on a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) Replace the bulbs inside the front headlight of the Mercedes GLK. Release the front bonnet by pulling the lever located at the bottom right of the da…
How to Replace the Front Headlight Bulbs on Mercedes GLK Series
How to Replace the Front Headlight Bulbs on Mercedes GLK Series
Mercedes Glk (2008-2015 / MK 1) Open the bonnet by pulling the lever located at the bottom right of the dashboard (if present) and secure it with the prop. Locate the inspection cap…
How to Change Oil on a Mercedes Glk
How to Change Oil on a Mercedes Glk
Mercedes Glk (2008-2015 / MK 1) How to change the engine oil on a Mercedes Glk? Let's look at the oil and filter change. Open the car door and pull up the engine compartment release…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos