|
Do it yourself
| |||
| ||||
How to Remove the Instrument Cluster from the Mercedes C-Class
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
Follow these instructions to remove and replace the instrument cluster of the Mercedes C-Class by following these simple steps. First, get inside the vehicle, adjust the steering wheel down; then use a thin plastic trim tool to remove the instrument cluster cover, and unscrew all the mounting screws located on the sides with a T20 Torx wrench, as shown in the video. At this point, disconnect the electrical connectors found behind the cluster, remove it, and replace it with the new one, applying the reverse procedure!
Updated on 13 September 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. how to perform the operation on the Mercedes C-Class. First, get inside the vehicle and start by removing the central plastic cover of the dashboard,.. …
Mercedes Classe C
(2000-2007 /
W203)
.. remove the instrument cluster from a Mercedes C-Class? Carefully follow these steps to disassemble it: Use a lever to remove the instrument cluster trim.. …
Mercedes Classe C
(2007-2013 /
W204)
.. and replace the dashboard of the Mercedes C-Class, following the instructions below. First, get inside the vehicle and start by removing the wood.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Change the Key Fob Battery for an Audi Q8?
To change the key fob battery for an Audi Q8, start by locating the release button on the key. Press this button to extract the emergency mechanical key. With the mechanical key removed, find the visible slot in the key body. Use a small flathead screwdriver or a plastic tool to gently pry open the key fob shell. Once the shell is open, you will find the battery, usually a CR2032. Note the orientation of the battery before removing it. Remove the old battery and insert the new one, ensuring the positive (+) side is oriented correctly. Reassemble the key fob shell, making sure all pieces fit together snugly. Finally, reinsert the mechanical key into its housing. Your key should now function properly with the new battery. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |