Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Battery

See other generations:
This video is currently unavailable

Today's guide will show you the steps to remove and replace the battery in a Mercedes B-Class. First, open the front passenger door and start by removing the mat and the cover underneath, gaining access to the battery compartment; then disconnect both battery terminals (positive and negative), as shown in the video.

At this point, remove and replace the battery with a new one of the correct type and the same amperage; insert it in the correct orientation for the terminal connections, applying the reverse procedure!


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Mercedes B-Class?
How to Replace the Battery in a Mercedes B-Class?
Mercedes Classe B (2011-2019 / MK 2, W246) .. To replace the battery in a Mercedes B-Class, open the bonnet and locate the plastic cover protecting the unit, positioned immediately under.. …
How to Replace the Key Battery of a Mercedes B-Class
How to Replace the Key Battery of a Mercedes B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. the top of the electric key of your Mercedes B-Class to release the physical emergency key, then remove it. Next, unclip the rear cover of the electric.. …
How to Replace the Remote Battery of the Mercedes-Benz Class B
How to Replace the Remote Battery of the Mercedes-Benz Class B
Mercedes Classe B (2005-2011 / MK 1, W245) .. battery of the first generation Mercedes-Benz Class B. You will need a CR 2025, 3V battery. Start by extracting the metal key contained within the.. …

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the battery of the Mercedes B-Class W245 located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos