Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Mercedes A-Class?

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Key

In order to program the key of the Mercedes Classe A, you must insert it into the ignition switch of the vehicle: once it has been inserted, you can connect a diagnostic tool to the OBD port of the vehicle, located under the steering column. Then you must select the model of the car in question and its corresponding version: at this point, you can follow the instructions in the tutorial to ensure that the key is programmed correctly, finally disconnecting the scanner.

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Mercedes A-Class?
How do you program the key of the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. be possible to program the key of the Mercedes Class A by inserting it into the corresponding ignition block: once it has been inserted into its slot,.. …
How to Reset the Service Light on a Mercedes A-Class W169?
How to Reset the Service Light on a Mercedes A-Class W169?
Mercedes Classe A (2004-2012 / W169) .. a wrench-shaped light, as seen in the Mercedes A-Class W169, which must be turned off after completing the required work. To turn off the light for this.. …
How do you reset the Service light in the Mercedes Class A?
How do you reset the Service light in the Mercedes Class A?
Mercedes Classe A (2012-2018 / W176) .. Using our Mercedes Class A, therefore covering kilometers, we have reached the moment of the warning light turning on, indicating.. …

    Frequently Asked Questions

    • Classe A 2012-2018 - Why is my Mercedes A-Class W176 key not recognized? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos