Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Manufacturer Emblem from the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Manufacturer emblem

See other generations:
Video tutorial

Today's instructions will show you how to remove and replace the manufacturer emblem on the trunk lid of the Mercedes C-Class. First, open the trunk lid and start heating the emblem with a heat gun; then use a thin metal wire to gently remove the manufacturer emblem, as shown in the video.

At this point, clean the surface where the new emblem will sit, then attach the new emblem, following the video tutorial to the end!


Updated on 13 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. the manufacturer emblem on the Mercedes-Benz C-Class. First, move to the rear of your car and use a thin lever to gently pry off the manufacturer emblem... …
Mercedes Classe C (2007-2013 / W204) .. Let's replace the starter motor on a Mercedes C-Class. First, use a socket wrench to disconnect the battery cables. Remove the engine soundproofing panel.. …
Mercedes Classe C (2007-2013 / W204) .. you begin, open the rear door of your Mercedes C-Class. Start by unscrewing and removing all the screws securing the rear door panel. Once you have unscrewed.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos