Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield washer fluid reservoir in a Mercedes Viano van?

Model: Mercedes Viano MK 1, W639 - Years 2003-2013
Part: Checks and maintenance

In this tutorial we can see how to replace the windshield washer fluid reservoir in the Mercedes Viano van, a very simple and quick operation. First of all, we open the hood, then we locate the windshield washer fluid reservoir, located on the driver's side, disconnect the connector of the respective sensor and release it from the support. We then grab the windshield washer pump, pull it upwards and remove it from the reservoir. To remove the reservoir, just unscrew the single fixing bolt, while to install the replacement and reassemble everything, just follow the reverse procedure.

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service in a Mercedes Viano Van?
How to Reset the Service in a Mercedes Viano Van?
Mercedes Viano (2003-2013 / MK 1, W639) In this tutorial, you will learn how to reset the service in a Mercedes Viano van, a very simple and quick operation to perform only after completing…
Where is the Battery Located in the Mercedes Viano Van?
Where is the Battery Located in the Mercedes Viano Van?
Mercedes Viano (2003-2013 / MK 1, W639) In this video, see where the battery is located in the Mercedes Viano van, useful if you need to replace or simply recharge it. As shown, it is not i…
Where is the battery located in the Mercedes Viano van?
Where is the battery located in the Mercedes Viano van?
Mercedes Viano (2003-2013 / MK 1, W639) In this video, you can see where the battery is located in the Mercedes Viano van and how to proceed if you need to replace it. As shown, the battery…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos