Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp of the Mercedes B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Headlight

To prevent any issues with the electrical circuit, disengage the bonnet from the latch to lift and secure it with the support rod. Disconnect the battery terminals to avoid current flow while removing the headlamps. To replace just the bulb, remove the rear covers of the headlamp to extract and replace the individual bulbs. To replace the entire headlamp, remove the bolts securing it, disconnect the connector supplying power to all bulbs, and install the new headlamp.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Lights on a Mercedes-Benz B-Class
How to Replace the Position Lights on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. the position bulbs in the Mercedes-Benz B-Class. First, ensure the engine is cold to avoid burns. Open the bonnet. Remove the fluid reservoir in.. …
How to Replace the Radio in the Mercedes-Benz B-Class
How to Replace the Radio in the Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / W246, MK 2) .. the original radio in the Mercedes-Benz B-Class, following the instructions below. First, get inside the vehicle and start by removing the air.. …
How to Replace the Battery on a Mercedes-Benz B-Class
How to Replace the Battery on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. and replace the battery on a Mercedes-Benz B-Class in simple steps. First, open the front passenger door and start by removing the mat and the floor.. …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos