Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Mercedes A-Class

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Car stereo

In this video, let's see how to remove the radio from a Mercedes A-Class. Start by using a plastic pry tool to remove the air vents located in the center console (left and right vents). Use a screwdriver to remove the screws located in the slots of the air vents. Once the securing screws are removed, grasp the radio with your hands and pull it out of its slot (after disconnecting the power and antenna cables). To reinstall the radio and its parts, proceed in reverse order. Test the correct operation before tightening the screws.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Car Radio on Mercedes A-Class
How to Remove the Car Radio on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. How to remove the car radio on Mercedes A-Class? Let's carefully see in this video how to perform the disassembly: use the original or aftermarket.. …
How to Remove the Factory Radio from a Mercedes A-Class
How to Remove the Factory Radio from a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. you remove the factory radio from a Mercedes A-Class? Watch this video closely to see how to perform the removal following the guide. Use the original.. …
How to Remove the Factory Radio on a Mercedes A-Class
How to Remove the Factory Radio on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. do you remove the factory radio on a Mercedes A-Class? Let's carefully go through the disassembly process. Use the original or aftermarket metal keys.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos