Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Mercedes Citan Van?

Model: Mercedes Citan MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, see how to replace the cabin filter in the Mercedes Citan van, a very simple and quick operation. First, position yourself on the passenger seat, then using a plastic spatula, unclip both the base of the gear knob and the frame of the centre console.

Next, remove the console frame itself, open the glove compartment, and also remove it by unscrewing the seven indicated fixing screws. At this point, locate the long rectangular flap, open it, extract the old filter, and insert the replacement.

To reassemble everything, simply follow the reverse procedure.


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Where is the cabin filter located in the Mercedes Citan van?
Where is the cabin filter located in the Mercedes Citan van?
Mercedes Citan (2012-2020 / MK 1) In this video, you can see where the cabin filter is located in the Mercedes Citan van and how to proceed if you need to replace it. As shown, it is …
How to Reset the Service Light on the Mercedes Citan Van?
How to Reset the Service Light on the Mercedes Citan Van?
Mercedes Citan (2012-2020 / MK 1) In this tutorial, you will learn how to reset the service light on the Mercedes Citan van, a very simple and quick operation to perform only after co…
How to Reset the Service Light on a Mercedes Citan Van?
How to Reset the Service Light on a Mercedes Citan Van?
Mercedes Citan (2012-2020 / MK 1) In this tutorial, see how to reset the service light on a Mercedes Citan van. This is an extremely simple and quick operation to perform only after c…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos