Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg Vari
    4. : Headlight bulb

MG MG Various - Headlight bulb

Headlight Bulb MG MG Various ( / )

MG MG Various
How to replace the headlight bulb of the MG 6.
In this brief guide, we will see the steps that will allow us to disassemble and replace the low beam bulb of the front headlight of the MG 6. First, let's …Read all…
Posted on 27 November 2025 by ScegliAuto
MG MG Various
How to Replace the Dipped Beam Bulbs in the MG ZR?
As shown in this tutorial, replacing the front headlamp bulbs in the MG ZR is a very simple task. Before proceeding, ensure the key is not in the ignition for …Read all…
Posted on 15 July 2026 by ScegliAuto
MG MG Various
How to Replace the Front Headlamp Bulb on an MG GS
To replace the front headlamp bulb on an MG GS, open the bonnet to access the rear of the headlamp corresponding to the bulb that needs replacing. You will …Read all…
Posted on 6 September 2026 by ScegliAuto
MG MG Various
How to Replace the Front Headlamp Bulbs in the MG TF?
As shown in this tutorial, replacing the front headlamp bulbs in the MG TF is a straightforward and quick task. First, ensure that the key is not in the …Read all…
Posted on 6 July 2026 by ScegliAuto
MG MG Various
Removing Position Bulb on MG TF
In today's guide video, we will see how to remove and replace the position bulb of the front headlamp on an MG TF. First, open and lift the car's bonnet and …Read all…
Posted on 16 May 2026 by ScegliAuto
MG MG Various
Replacing Headlight Bulbs on an MG
Learn how to replace the headlight bulbs on an MG. Open the bonnet and secure it. Locate the inspection cap of the headlight (located at the back of the …Read all…
Posted on 15 March 2026 by ScegliAuto
Spark plugs (1) Body (1) Key (9) Timing belt (1) Air filter (3) Cabin air filter (6) Headlight bulb (6) Tail light bulb (1) Instrument panel light (1) Clock (1) Fuse box (5) AdBlue warning light (1) Warning light – error code (2) (3) Service warning light (3) Cylinder head (1) Blower motor (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos