Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the MG HS

Model: MG HS MK 1 - Years 2019-2026
Part: Service warning light

The following video tutorial will show us the steps to reset the service light related to the car maintenance on an MG HS vehicle. To reset the light, we need to turn on the instrument panel and immediately press the SIDE ARROW button on the steering wheel to access the settings related to the vehicle. By pressing the arrow button, we navigate through the menu until we select the "next service" option, then press the OK button to update the mileage for the next car maintenance. It is important to perform this operation only after replacing the engine oil and completing the other maintenance tasks. Return to the main menu and restart the instrument panel to complete the operation.

Posted on 8 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the MG HS
How to reset the service light on the MG HS
MG HS (2019-2026 / MK 1) To reset the service light related to the service on an MG HS car, we need to turn on the vehicle's instrument panel and press the menu button on the…
How to reset the TPMS light on the MG HS?
How to reset the TPMS light on the MG HS?
MG HS (2019-2026 / MK 1) The tire pressure sensor of the MG HS has the ability to reset automatically every time you adjust the pressure when the warning light appears. Simpl…
How to reset the service light of the MG HS
How to reset the service light of the MG HS
MG HS (2019-2026 / MK 1) In the following guide, we will help you complete the manual reset procedure for the service light of your MG HS. First of all, reach the driver's se…

Other guides you may be interested in

How to Replace Engine Oil and Filter on a Ducati Monster

How to replace engine oil and filter on a Ducati Monster? Follow this guide to perform maintenance. Position the motorcycle on the original stand, use a socket wrench to unscrew the oil sump bolt (drain the fluid into a container for disposal). Remove the worn oil filter with a strap wrench and fit a new one after cleaning the oil sump (check the gasket around the filter). Finally, top up with new fluid in the engine and close with the plastic inspection cap. Start the motorcycle to verify.

Watch the video!


by ScegliAuto

More videos