Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the MG 6.

Model: MG MG Various
Part: Headlight bulb

In this brief guide, we will see the steps that will allow us to disassemble and replace the low beam bulb of the front headlight of the MG 6. First, let's open the car's hood and start by removing the plastic protective cap located behind the headlight; then disconnect the electrical connector of the bulb in order to remove it, as shown in the video. At this point, replace and install the new low beam bulb, of the correct type and with the same fitting; then reassemble and check the operation of the low beam or high beam bulb.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on an MG
Replacing Headlight Bulbs on an MG
MG MG Various Learn how to replace the headlight bulbs on an MG. Open the bonnet and secure it. Locate the inspection cap of the headlight (located at the back of …
How to replace the MG GS headlight bulb?
How to replace the MG GS headlight bulb?
MG MG Various In order to replace the MG GS headlight bulb, you need to open the hood to access the rear part of the headlight corresponding to the bulb to be repl…
How to replace the headlight bulbs in the MG TF?
How to replace the headlight bulbs in the MG TF?
MG MG Various As we can see in this tutorial, replacing the headlight bulbs in the MG TF is a very quick and easy operation. First of all, make sure that the key i…

Other guides you may be interested in

Oil and Oil Filter Replacement on Suzuki RMZ 250 (2013)

Descriptive guide for replacing the engine oil and oil filter on a 2013 Suzuki RMZ 250. Obtain 1 litre of Suzuki SAE 10W40 oil and a K&N KN-207 oil filter. Position the bike on a central stand. Place a container for oil disposal under the engine. Start the engine and let it warm up, then turn it off. Using a ratchet and a 13mm socket, unscrew the two oil drain plugs located under the engine and let it drain. Using a ratchet and a 10mm socket, unscrew the two screws located on the side of the oil filter cover, on the right side of the engine. Remove the filter cartridge and clean the housing thoroughly. Insert the new filter in the same position as the old one. Screw the cover and the two drain plugs back on. Unscrew the oil filler neck located on the right side of the crankcase and pour in the oil. The manufacturer specifies 950ml for oil only, and 1000ml with filter replacement.

Watch the video!


by ScegliAuto

More videos