Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on the MG TF

Model: MG MG Various MK 1
Part: Blower motor

Video tutorial

In this brief and simple guide, you will find instructions on how to remove and replace the cabin fan resistor on the MG TF. First, get inside the vehicle on the passenger side and open the glove compartment. Then, unclip the two side arms and unscrew the fixing screws to remove it, as shown in the video.

Next, disconnect the electrical connector of the resistor, removing it from the cabin fan. Replace it with the new one and reassemble everything by following the reverse procedure of disassembly!


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the MG ZS?
How to Replace the Cabin Filter on the MG ZS?
MG MG Various To replace the cabin filter on the MG ZS, loosen the screws located directly beneath the glove compartment on the passenger side. Once these screws a…
How to Replace the Cabin Air Filter of the MG RX5
How to Replace the Cabin Air Filter of the MG RX5
MG MG Various This guide shows you how to remove and replace the cabin air filter of the MG RX5 in simple and quick steps. First, get into the vehicle on the passe…
How to Replace the Cabin Air Filter on the MG 350 - Roewe 350
How to Replace the Cabin Air Filter on the MG 350 - Roewe 350
MG MG Various This brief and simple guide provides the necessary instructions to remove and replace the cabin air filter on the MG 350 and Roewe 350. First, get in…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos