Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : How to change the date and time of Mg 3

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Checks and maintenance
Operation: How to change the date and time of Mg 3

Let's see in this guide how to change the date and time of the MG 3, following the instructions below. First of all we get on board the car and start turning on the instrument panel; then let's move to the central display to go to the car settings, then click on the clock item, as shown in the video. At this point we are going to change the hour and minutes, including the time format and date; then we leave the settings menu to memorize the time change, following the video tutorial until the end!


Posted on 12 May 2024 by ScegliAuto



Where to find vehicle identification codes in Mg 3?
MG 3 (2011-2023 / MK 2) The vehicle identification number, also known by the English name VIN Numbers, is written under the windshield, in the lower part and on the same sid
How to apply accessories to the Mg Zs car and turn it into a sports car.
MG 3 (2008-2011 / MK 1) As seen in the video, there are four accessory components that can be installed on the body of your Mg 3 car. Each component has a strong adhesive ta
How to change the fuel filter on the Mg 3
MG 3 (2008-2011 / MK 1) If we want to proceed in do-it-yourself mode with replacing the fuel filter on this car, we can follow the instructions given in the video and in thi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos