Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : Where to find vehicle identification codes in Mg 3?

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Checks and maintenance
Operation: Where to find vehicle identification codes in Mg 3?

The vehicle identification number, also known by the English name VIN Numbers, is written under the windshield, in the lower part and on the same side as the passenger. The same number can be found behind the tailgate. By opening the door on the driver's side, we can identify two plates with other identification data. In the first we find information such as the date of construction of the vehicle, its weight, the type of engine. The second, however, shows us details such as the correct tire pressure and the type of wheels that have been installed. Finally, other information can be found on the label affixed in the engine compartment.


Posted on 2 June 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos