Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the MG 5 air filter

Model: MG 5 Ap12 - Years 2012-2018
Part: Air filter

Today we will see, in this video tutorial, how to remove and replace the MG 5 engine air filter, in simple and quick steps. First we open the bonnet of our car and start unscrewing the fixing screws of the filter box cover, which we find at the top left; then we loosen the clamp screw of the intake sleeve, disconnecting it from the filter box, as shown in the video. At this point we remove and replace the air filter cartridge with the new one, inserting it in the correct direction; we just have to reassemble everything!

Posted on 25 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I replace the MG 5 air filter?
How do I replace the MG 5 air filter?
MG 5 (2012-2018 / Ap12) In order to replace the MG 5 air filter, you have to open the hood, so that you have access to the filter box located inside the engine compartment. …
How to replace cabin air filter on Mg 5
How to replace cabin air filter on Mg 5
MG 5 (2012-2018 / Ap12) If we need to replace the cabin air filter using the DIY method on this car, it may be useful for us to follow the instructions below and also take a…
How to replace cabin air filter on Mg 5
How to replace cabin air filter on Mg 5
MG 5 (2012-2018 / Ap12) The procedure to follow for replacing the passenger compartment air filter on the car is given below: access the passenger compartment by sitting on …

Other guides you may be interested in

How to Remove the Spark Plugs from a Volkswagen Up

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head. Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors. To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.

Watch the video!


by ScegliAuto

More videos