Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : How to remove the rear bumper of the Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Rear bumper
Operation: How to remove the rear bumper of the Nissan Qashqai

The disassembly of the rear bumper is carried out in a very simple way and requires no special precautions other than to remove it delicately in order not to damage the small plastic slots; once the rear bonnet has been opened, start by removing the screws along the bonnet closing line and then move to the edges of the wheel arch to be able to release and remove the trim molding from the edge of the mudguard; once the molding has been removed, it is finally possible to access the pin that fixes the edge of the bumper to the mudguard and then complete the disassembly.


Posted on 7 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos