Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Spark Plugs from a Volkswagen Up

Model: Volkswagen Up MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Spark plugs

Video tutorial

How to remove and replace the spark plugs on a Volkswagen Up? Follow these steps for proper removal. Pull the lever to open the engine compartment and lift the front bonnet, securing it in place.

Remove the plastic soundproofing panel on the cylinder head, then disconnect the power connectors using a screwdriver after unscrewing them with a socket wrench. Pull off the coils by hand and unscrew the spark plugs with the socket wrench, finally pulling them out of the cylinder head.

Take the new spark plugs and guide them into the engine head using the extension of the socket wrench. Finally, tighten the spark plugs securely and reconnect the respective power connectors.

To finish: reassemble the soundproofing panel and close the engine bonnet. - Socket wrench with sockets - Flat or screwdriver bits - Battery-powered screwdriver - Protective gloves.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

Volkswagen Up (2011-2024 / MK 1) Let’s briefly go over the instructions that will allow you to remove and replace the spark plugs of the Volkswagen Up 1.0 MPI engine. First, open the…
Volkswagen Up (2011-2024 / MK 1) In this guide, you will see the steps to remove and replace the engine spark plugs on the Volkswagen Up 1.0 MPI. First, open the bonnet of the vehicl…
Volkswagen Up (2011-2024 / MK 1) Do you want to remove the spark plugs from your Volkswagen Up? This video details how to proceed. Pull the engine compartment release lever located a…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos