Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the passenger side door panel on a Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Door panel
Operation: How to remove the passenger side door panel on a Volkswagen Polo

How to remove the passenger side door panel on a Volkswagen Polo? This video demonstrates how to proceed. Before starting the disassembly work, let's disconnect the battery terminals located in the front engine compartment. With a lever or screwdriver we go to leverage the handle placed on the door panel, we remove the covering of the same. With a screwdriver we unscrew any screws on the panel, with the plastic lever we release all the clips by levering around the entire perimeter of the door panel, then, let's pull it off by grabbing it with our hands. Now we release the cable of the opening lever, the clamps of the window lifters and the speakers. Let's reassemble everything by proceeding backwards.


Posted on 7 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 1994-2003 - How do you remove the Volkswagen Polo door panel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos