Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front speakers of the Volkswagen Polo

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003
Part: Speaker

The following steps will show us the process of disassembling and replacing the front speaker of the Volkswagen Polo. First, we open the front door of the car and start unscrewing all the fastening screws we find on the sides and under the plastic cover of the handle; once the panel is removed, it will be possible to unscrew the speaker screws and disconnect its electrical connector, in order to remove it, as shown in the video. At this point, we install the new front speaker, reassembling the door panel, following the reverse process!

Posted on 9 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wheel on a Volkswagen Polo
How to Replace the Front Wheel on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Before you start, open the boot of your Volkswagen Polo to retrieve the spare wheel and the jack provided in the basic kit. Begin by lifting the fron…
How to remove the front door of the Volkswagen Polo?
How to remove the front door of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To remove the front door of the Volkswagen Polo, open the door itself and move the internal seal halfway up: here you will find various cables and co…
How to replace the front door speaker of the Volkswagen Polo
How to replace the front door speaker of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The instructions in this guide will show us how to disassemble and replace the front door speakers of the Volkswagen Polo. First, we open the front d…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos