Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to remove the front door panel on a Volkswagen Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Door panel
Operation: How to remove the front door panel on a Volkswagen Polo

How to remove the driver's door panel on a Volkswagen Polo? This video explains how to proceed. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. With a lever we go to pry into the coating of the handle (we remove the piece), then, with a screwdriver we go to unscrew the locking pins in the handle located inside the door panel, unscrew the pins placed in the plastic of the door opening lever. Use the lever to remove the locking clips placed on the perimeter of the car door panel. Finally, we grab the panel with our hands and lever it off the door. We disconnect the cable of the door opening lever, the power terminals of the power windows buttons.


Posted on 7 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 1994-2003 - How do you remove the Volkswagen Polo door panel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos