Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Head Gasket on the MG ZR

Model: MG MG Various
Part: Cylinder head

Video tutorial

In this tutorial, you will see step-by-step instructions for dismantling and replacing the head gasket on the MG ZR, following these simple steps. First, open the bonnet of your car and start by removing the cover of the cylinder head by unscrewing the fixing screws; then disconnect the electrical connectors of the coils, subsequently removing the spark plugs (using a socket wrench with an extension), as shown in the video.

At this point, unscrew the screws of the rocker cover to remove it, replacing its gasket!


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery for an MG
How to Replace the Remote Battery for an MG
MG MG Various Today, we will explain how to independently replace the battery in a car remote for an MG vehicle. To replace the battery, unlike other keys, it is n…
How to Replace the Key Fob Battery of an MG Astor
How to Replace the Key Fob Battery of an MG Astor
MG MG Various The procedure to replace the battery in the key fob of an MG Astor is straightforward. Take the key fob and press the button on the side to remove th…
How to Open the Bonnet of an MG TF
How to Open the Bonnet of an MG TF
MG MG Various Before you start, head to the rear engine cover of your MG TF. Open the boot using the car key. This will allow you to reach the lever that releases …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos