Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to prevent the DC/CC converter of the Mg 3 from getting wet.

Model: MG 3 MK 1 - Years 2008-2011
Part: Checks and maintenance

As seen very well in the video, the part underneath the seat got wet and as a consequence, the Mg3 car wouldn't start because the DC/CC Converter is located under the seat, in this case, in the middle of the water. To prevent this from happening again, the converter will have to be placed in a different location. It is necessary to remove the front seat and the side bands to remove the upholstery and locate the converter. Disconnect the electrical connector and unscrew the converter from its housing. As seen in the video, you will have to position it on the side bar once the carpet is replaced. Bolt it to the body with a drill and screws.

Posted on 24 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the MG MG3?
How to reset the service in the MG MG3?
MG 3 (2011-2024 / MK 2) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and fast operation, to be carried out only once all scheduled…

Other guides you may be interested in

How to Remove the Window Regulator Motor from a Volkswagen Touareg

Learn how to remove the door motor from a Volkswagen Touareg. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover, then unscrew the screws inside with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips. Remove the door panel by hand, then use a screwdriver or power screwdriver to unscrew the fastening screws of the door actuator motor. Disconnect the various power terminals and replace it with a new one. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos