Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the engine protection shield under the MG Zs.

Model: MG ZS Zs11 - Years 2017-2024
Part: Engine

Many cars have this engine protection that ensures the engine is protected from mud, water, debris, and dirt. We will also install it on our MG ZS. The website gzracen.en.made-in-china.com only sells in large quantities. To purchase retail, we must go to Alibaba, where we can buy this piece for only $20. The kit comes complete with all the plastic and metal screws and washers, which are very easy to install, although - as we can see from the video - it is almost necessary to lift the car onto a bridge or at least onto supports that keep it high enough. The shield also protects the transmission and many other essential and delicate parts of our car.

Posted on 7 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Darkening films for MG ZS
Darkening films for MG ZS
MG ZS (2017-2024 / Zs11) In this video, the youtuber conducted a test to assess the difference between the car as it comes out of the factory and with the installation of dar…
How do you replace the radiator on the MG ZS?
How do you replace the radiator on the MG ZS?
MG ZS (2017-2024 / Zs11) In order to replace the radiator of the MG ZS you have to go and open the bonnet of the car, so that you can unscrew all the screws that fix the fron…
How to replace the MG ZS air filter
How to replace the MG ZS air filter
MG ZS (2017-2024 / Zs11) If the air filter inside the engine compartment of your MG ZS shows serious signs of wear, then it is time to replace it and fit a new one so as to p…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos