Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the brake wear indicator light on the Mini Cooper

Model: Mini Mini F55, F54, F57, F56 - Years 2014-2023
Part: Warning light – error code

Today's steps will show us how to reset the brake pad wear indicator light on the Mini Cooper; before performing this operation, it is necessary to have already replaced the brake pads. First, we get into the car and start the instrument panel; then we press and hold the button on the speedometer until the reset indicator appears, as shown in the video. We press the button again and wait for the brake wear indicator light to be reset by the instrument panel.

Posted on 23 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the brake wear indicator light of the Mini Cooper
Resetting the brake wear indicator light of the Mini Cooper
Mini (2007-2014 / R57, R55, R56) .. Let's see the instructions on how to reset the brake wear indicator light on the Mini Cooper, following these simple steps. It may.. …
How to reset the brake pad wear warning light on the Mini Cooper
How to reset the brake pad wear warning light on the Mini Cooper
Mini (2001-2007 / R52, R50, R53) Let's find out below the instructions that will allow us to reset the brake pad wear warning light of the Mini Cooper. First of all we get on board t…
How to reset the Mini Countryman R60 brake service light
How to reset the Mini Countryman R60 brake service light
Mini (2010-2016 / R60, Countryman1) In this short video we will see the instructions that will allow us to reset the brake wear service light on the Mini Countryman R60, but also on the…

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos