|
Do it yourself
| |||
| ||||
How to replace the steering column of the Mini Cooper 2
Model: Mini Mini
R53, R52, R50
- Years 2001-2007
Today we will explain how to replace the steering head of a Mini Cooper model 2. To perform the replacement, turn off the car, pull the handbrake, and lift the right front wheel in order to access the steering system. Then lift the front of the car and support it on jack stands. Make a mark with a marker between the tie rod and the steering head so that it is easier to remember the position after disassembly; using a 24 mm wrench, loosen the nut on the steering head, on the tie rod side. Brush the steering head fixing nut and spray some loosening agent. Using a 15 insert socket wrench, loosen the support nut of the steering head; with a steering head extractor and a hammer, push the nut that has just been positioned so that the head detaches from the pin. Push on the pin to replace it and unscrew the steering head. After removing the steering head, before continuing with the assembly of the new one, have the geometry checked by a professional to avoid steering breakage. Proceed with the assembly following the steps in reverse.
Posted on 17 January 2025 by ScegliAuto
Video tutorial
Related tutorials
Mini
(2001-2007 /
R53, R52, R50)
In this guide we will see the instructions that will allow us to repair the power steering pump of the Mini Cooper. Problems related to the power ste…
Mini
(2001-2007 /
R53, R52, R50)
In order to replace the power steering pump of the Mini Cooper, it will be necessary to lift the car so that it is possible to access the components …
Mini
(2010-2016 /
Countryman1, R60)
Before you can start, disconnect the battery, then sit in the driver's seat of your Mini Cooper. Begin by unscrewing and removing the Torx screws tha…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.488
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |