Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mini Cooper key remote control

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Key

In this short guide we will see the information regarding the disassembly and replacement of the battery of the Mini Cooper key remote. First, take our remote control and start by removing the physical key from inside it; then, pry open the remote control access slot, thus accessing the electronic board and the battery, as shown in the video. At this point, remove the battery and replace it with a new one of the correct type and with the same code; reassemble the remote control and then verify its correct operation.

Posted on 28 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the Mini Cooper remote control battery?
How do you replace the Mini Cooper remote control battery?
Mini (2014-2023 / F57, F56, F55, F54) In order to replace the battery in the Mini Cooper remote control, you have to go and press the button at the top of the device, so that you can remo…
How do you replace the battery of the Mini Cooper remote control?
How do you replace the battery of the Mini Cooper remote control?
Mini (2007-2014 / R56, R57, R55) To replace the battery of the Mini Cooper remote control, you will need to use an object that can act as a lever to separate the two halves of the re…
How do you replace the battery of the Mini Cooper remote control?
How do you replace the battery of the Mini Cooper remote control?
Mini (2001-2007 / R52, R50, R53) To replace the battery of the Mini Cooper remote control, you need to use an object like a screwdriver to pry open the back of the device. This will …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos