Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light of a Mini Cooper

Model: Mini Mini R57, R55, R56 - Years 2007-2014
Part: Service warning light

Today we will see how to reset the service on a Mini Cooper, model produced from 2007 to 2014. Let's start the procedure by turning on the ignition of our vehicle but without starting it, then we press and hold the "TRIP" button on the right of the speedometer to open the service menu on the information display. Once done, we press and hold the "BC" end lever button on the oil maintenance screen until the "RESET" message appears, then release the button and hold it down again until the reset is complete as shown in the video.

Posted on 10 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the lighting of the Mini Cooper's instrument panel
How to adjust the lighting of the Mini Cooper's instrument panel
Mini (2014-2023 / F55, F54, F57, F56) Today we will explain how to easily and quickly adjust the lighting of the Mini Cooper's instrument panel. To perform this operation, it is important…
How to reset the service on a Mini Cooper R56.
How to reset the service on a Mini Cooper R56.
Mini (2007-2014 / R57, R55, R56) This video will show us how to reset the service in a Mini Cooper R56. To begin we will have to turn on the panel, displaying the message indicating …
How do you replace the roof of the Mini Cooper S?
How do you replace the roof of the Mini Cooper S?
Mini (2001-2007 / R52, R50, R53) In order to replace the headliner of the Mini Cooper S, you need to loosen all the screws that secure the lining to the top of the roof, so that it c…

Removing Ignition Cylinder from Audi A3

In this video, you will see how to replace the ignition cylinder of the Audi A3. First, remove the side plastic cover where the fuses are located: take out the blue 1 Amp fuse. Next, disconnect the battery terminals. Now, connect the cables that run to the steering and remove the central part by pulling it towards you (the airbag). Disconnect the connector by removing it completely. Remove the two screws to take off the plastic cover of the ignition: disconnect the various control units and use a drill to break the seal of the ignition lock to remove it.

Watch the video!


by ScegliAuto

More videos