Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the key of the Mini Countryman r60?

Model: Mini Mini Countryman1, R60 - Years 2010-2016
Part: Key

When the key/remote control of our car does not allow us to open and close the vehicle, it most likely has a low battery. We are talking about a flat battery, marked cr2032, the most common one, and to replace it you do not necessarily have to go to service centers, you can also do it yourself. Our video tutorial offers us help in this regard: with a small flathead screwdriver, we pry open the cover of the remote control, on the back side, thus immediately gaining access to the aforementioned battery. We remove the old one, insert the new one, and close the shell. Job done.

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box on the Mini Countryman R60
Where is the fuse box on the Mini Countryman R60
Mini (2010-2016 / Countryman1, R60) In our new guide dedicated to your Mini Countryman R60 (year 2010-2016) we will describe step by step the few steps necessary to be able to identify …
Where is the fuse box located in the Mini Countryman R60?
Where is the fuse box located in the Mini Countryman R60?
Mini (2010-2016 / Countryman1, R60) The Mini Countryman R60 model has two fuse boxes inside. Today we will specifically talk about fuse box number 2, located inside the cabin. The fuse …
How to replace the battery of a Mini Countryman key
How to replace the battery of a Mini Countryman key
Mini (2010-2016 / Countryman1, R60) Replacing the battery of the remote key of the Mini Countryman is very simple. It is possible to perform this operation independently and in a few mi…

Other guides you may be interested in

How to Remove the Cabin Air Filter from a Fiat Panda

See how to remove the cabin air filter (pollen filter) in the Fiat Panda. The cabin filter is located at the bottom left of the glove compartment. Using a plastic lever, remove the cover located at the bottom right of the centre tunnel; get a screwdriver or cordless drill, remove the cap from the filter housing, then extract the worn cabin filter. Insert a new cabin filter, ensuring it fits snugly around the walls of the housing, refit the cap of the filter housing and tighten the screws. Check the correct installation of the previously fitted parts.

Watch the video!


by ScegliAuto

More videos