Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the fuel door and cap of the Mini Countryman

Model: Mini Mini Countryman2, F60 - Years 2017-2023
Part: Fuel cap

These short and simple steps will show us how to open the fuel filler flap and cap of the Mini Countryman. First of all, in order to open the fuel filler flap, it is necessary to have unlocked all the door locks; then move to the outside of the vehicle and press on the side of the fuel filler flap to open it, then unscrew the fuel cap to be able to refuel at the gas station, as shown in the video. At this point, screw the cap until it clicks and finally close the fuel filler flap, then start the engine!

Posted on 11 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to open the fuel door and cap of the Mini Cooper.
How to open the fuel door and cap of the Mini Cooper.
Mini (2007-2014 / R57, R55, R56) In this video tutorial, we will see the steps on how to open the fuel door and cap of the Mini Cooper. First, we move to the exterior and begin to op…
How to open the fuel cap and the fuel door of the Mini Cooper
How to open the fuel cap and the fuel door of the Mini Cooper
Mini (2001-2007 / R52, R50, R53) Today's guide will show us the steps on how to open the fuel door and cap of the Mini Cooper, following the instructions below. First, let's move to …
How to open the Mini Countryman with the remote control key.
How to open the Mini Countryman with the remote control key.
Mini (2017-2023 / Countryman2, F60) These short and simple instructions will show us how to open the doors of the Mini Countryman in case of an emergency or when the remote control batt…

Other guides you may be interested in

How to Replace the Damaged Number Plate Bulb on Fiat 600

In this video, learn how to replace the damaged number plate bulb on a Fiat 600. Use a screwdriver or plastic lever to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the lamp holder with your hands, then disconnect the bulb from it. Fit the new bulb/LED (same size and voltage) into the lamp holder, then reassemble the light unit into the bodywork of the tailgate, pressing it until the clips lock automatically. Finally, test the correct operation of the previously installed bulb.

Watch the video!


by ScegliAuto

More videos