Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the high-speed fan of the Mini R56

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Blower motor

In this video we can see how to replace the high-speed fan of a Mini R56: This fan only worked at maximum speed, so the problem was the fan resistor. The YouTuber recommends buying only original parts, because from his experience, aftermarket parts have a short lifespan and tend to break again shortly after. Considering that this part is located in an unfortunate position, behind the driver's footwell panel, which is fixed by two 6mm screws. The resistor is hidden in the HVAC box behind the heater radiator, and removing it from there is not easy at all. After that, it needs to be disconnected from the electrical connector. Putting the new one back in place is also not easy, and we need to be careful of the heater radiator, which could be very hot if it was in use until shortly before. Once the resistor is reinstalled, we can put the panel back in place.

Posted on 5 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Windscreen Wiper Blade
Mini (2007-2014 / R56, R55, R57) Winter is approaching: what better time to check the efficiency of your wiper blades and replace them if necessary. It is advisable not to replace ju…
How to Replace the Cabin Filter in a Mini Cooper R56
How to Replace the Cabin Filter in a Mini Cooper R56
Mini (2007-2014 / R56, R55, R57) If the cabin air filter in your Mini Cooper R56 (2007-2014) is worn out or you haven't replaced it for a long time and want to know how to carry out …
How to replace the air filter of the Mini Cooper R56
How to replace the air filter of the Mini Cooper R56
Mini (2007-2014 / R56, R55, R57) The engine air filter in your Mini Cooper R56 is a very important component and for this reason you must replace it periodically in order to preserve…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos