Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Fan and Resistor on a Mini Cooper S

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

In this guide, we will cover the main steps for removing and replacing the cabin fan and its resistor on a Mini Cooper S. First, get inside the cabin and start by removing the plastic cover located at the bottom on the driver's side; then disconnect the wiring of the cabin fan to remove it, as shown in the video.

At this point, disassemble and replace the resistor of the fan if necessary, connect it, and test the fan at various speeds before reassembling everything inside the dashboard.


Posted on 12 September 2026 by ScegliAuto


Related tutorials

Mini (2010-2016 / R60, Countryman1) How do you remove the air fan resistor? Follow these steps to remove the resistor on a Mini Cooper. Remove the plastic cover under the centre tunnel …
Mini (2001-2007 / R53, R50, R52) To replace the cooling fan resistor on the Mini, you need to remove the fan from inside the engine bay to make the job easier. You will need to pry o…
Mini (2007-2014 / R57, R56, R55) How do you replace the resistor and fan on a Mini? Follow this video for disassembly: use a lever to remove the plastic cover under the front dashboa…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos