Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Blower Motor on a Mini R56

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Checks and maintenance

In this article, you will learn how to replace the blower motor on a Mini Cooper R56. The procedure is simple and requires the use of a specific Torx key. To replace it, first remove the cover located in the cabin on the driver's side, on the central tunnel next to the pedals; it is advisable to move the seat all the way back to have more space to work. Once you locate the cover, unscrew the Torx screws, then remove the cover. After removing the cover, locate the blower motor situated at the top, disconnect the connections, and remove the old motor. Now, insert the new motor, connect it, and refit it in position. At this point, replace the cover and reinsert the fastening screws.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2007-2014 / R56, R55, R57) In this video, you will see the main instructions for dismantling the dashboard of the Mini Cooper R56 to access the cabin fan motor. First, remove t…
Mini (2007-2014 / R56, R55, R57) If the cabin air filter in your Mini Cooper R56 (2007-2014) is worn out or you haven't replaced it for a long time and want to know how to carry out …
Mini (2007-2014 / R56, R55, R57) The engine air filter in your Mini Cooper R56 is a very important component and for this reason you must replace it periodically in order to preserve…

Other guides you may be interested in

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer
    • Mini 2014-2023 - When to service the Mini Cooper? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos