Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ignition coil of a Mini Cooper

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Ignition coil

In this video, we will see how to replace the ignition coil of a Mini Cooper: first, we need to remove the cover of the engine block with a T30 socket wrench, then using a screwdriver, we pry at the bottom to remove the cover. We remove the cover and move the coil back and forth until it comes out. On the new one, we can put a small amount of dielectric grease. We can find the kit of the four coils with the code B0C6WNCH4H on Amazon, priced at 138.22 euros, with free delivery. We recommend replacing them one at a time, to avoid confusion, and once the operation is completed, we can put the engine block cover back in place.

Posted on 31 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the ignition coil of the Mini R50
How to replace the ignition coil of the Mini R50
Mini (2001-2007 / R53, R50, R52) The guide shows how to disassemble the ignition coil of the Mini R50. The first step is to open the bonnet; locate the spark plugs, disconnect the ca…
Replacing the Ignition Coil
Replacing the Ignition Coil
Mini (2001-2007 / R53, R50, R52) Obtain the correct replacement coil. To access the coil replacement, only a few tools are needed. Start by removing the metal cover by unscrewing the…
How to repair the power steering pump of the Mini Cooper
How to repair the power steering pump of the Mini Cooper
Mini (2001-2007 / R53, R50, R52) In this guide we will see the instructions that will allow us to repair the power steering pump of the Mini Cooper. Problems related to the power ste…

Other guides you may be interested in

How to Replace the Bulbs on a Nissan Almera Rear Light

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Watch the video!


by ScegliAuto

More videos