Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located on the 2009 Mini One D?

Model: Mini Mini R57, R55, R56 - Years 2007-2014
Part: Checks and maintenance

In this new guide aimed at all of you who have a 2009 Mini One D, we will explain the steps you need to take in order to locate the OBD2 port inside the vehicle by yourself. First of all, you need to open the driver's side door, then get into the car and shift your attention to the lower left side of the dashboard. At this point, locate the OBD2 port you were looking for and connect a diagnostic tool to it in case any errors are detected by the ECU of your Mini One D. The procedure is now complete.

Posted on 10 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located on the Mini Cooper R56?
Where is the OBD2 port located on the Mini Cooper R56?
Mini (2007-2014 / R57, R55, R56) If you want to independently locate the OBD2 port inside the cabin of your Mini Cooper R56, just follow the steps described below and apply them step…
Where is the OBD2 port located on the Mini Cooper S R53?
Where is the OBD2 port located on the Mini Cooper S R53?
Mini (2001-2007 / R52, R50, R53) If you don't know where the OBD2 port of your Mini Cooper S R53 is located, don't worry because thanks to the steps described in the following guide …
Where is the OBD2 Port on a 2011 Mini Cooper?
Where is the OBD2 Port on a 2011 Mini Cooper?
Mini (2007-2014 / R57, R55, R56) If you are looking for the OBD2 port located inside the cabin of your Mini Cooper (2011 model), then you just need to follow these steps. First, open…

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos