Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Install the Sun Visor on a Mini

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
This video is currently unavailable

Learn how to remove and install the sun visor on a Mini. This operation is very easy if you follow the correct steps. First, unscrew the securing screws of the lever mounts (left or right side), and disconnect the power connector.

Now take the sun visor and screw in the left hook; then screw in the right one using the screwdriver. Finally, attach the sun visor to the plastic hook on the right and remove the protective film from the interior mirror.

Test the correct operation of the newly installed piece.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Replace the Sun Visor on a Mini One?
How to Replace the Sun Visor on a Mini One?
Mini (2001-2007 / R53, R50, R52) To replace the sun visor on a Mini One, unscrew the two screws that secure the visor support on its inner side. Once these screws are loosened, disco…
How to Replace the Sun Visor Bulb on a Mini Cooper
How to Replace the Sun Visor Bulb on a Mini Cooper
Mini (2010-2016 / R60, Countryman1) In this video, we will show you how to replace the bulb in the sun visor of a Mini Cooper. To do this properly, remove the visor from its housing by …
How to Open the Sunroof on a Mini Cooper
How to Open the Sunroof on a Mini Cooper
Mini (2014-2023 / F55, F54, F56, F57) In this video tutorial, you will see the instructions that will allow you to open the sunroof on a Mini Cooper in simple and quick steps. First, get …

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos