Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Brake Pad Service Light of the Mini Clubman

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Checks and maintenance

Today, we will see the instructions to reset the brake pad service light of the Mini Clubman. First, get inside the vehicle and turn on the instrument panel. Using the button on the panel, navigate to the service settings until you reach the brake pad replacement setting, as shown in the video. At this point, hold the button for about ten seconds, confirming and executing the reset of the brake pad service light; the service should be performed after replacing the worn brake pads.

Posted on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the brake pad wear indicator light on the Mini Cooper.
How to reset the brake pad wear indicator light on the Mini Cooper.
Mini (2007-2014 / R55, R57, R56) Today we will see the steps that will allow us to reset the brake pad warning light on the Mini Cooper. First of all, we get on board the car and tur…
How to reset the brake pad wear warning light on the Mini Cooper
How to reset the brake pad wear warning light on the Mini Cooper
Mini (2001-2007 / R53, R50, R52) Let's find out below the instructions that will allow us to reset the brake pad wear warning light of the Mini Cooper. First of all we get on board t…
Resetting the brake pad warning on the Mini Countryman.
Resetting the brake pad warning on the Mini Countryman.
Mini (2017-2023 / F60, Countryman2) This short guide will show us how to reset the brake pad warning on the Mini Countryman, following the instructions below. First, we get into the car…

    Frequently Asked Questions

    • Mini 2014-2023 - How much is the coupon for the Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Replace the Alternator on a Citroen Berlingo

For this simple operation, you will need to release the bonnet from the appropriate lever to lift it. Next, for safety and to protect the more delicate circuits, disconnect the cables from the battery. You can now work directly on the motor located under the air intake box. Remove it by unscrewing the various bolts, then working from underneath your vehicle, reach the motor in question. Disconnect the connector that powers it and unscrew the bolts that secure it. Now, simply install the new one.

Watch the video!


by ScegliAuto

More videos