Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the ABS sensor of a Mini

Model: Mini Mini R50, R52, R53 - Years 2001-2007
Part: Checks and maintenance

How to remove the ABS sensor of a Mini. We place our car on a column bridge, we lift to a comfortable height to intervene. We unscrew the wheel pins with a telescopic wrench and (compressed air drill) remove the rim; we begin to unscrew the locking pins of the ABS sensor (psto above the brake disc). With a screwdriver we detach the clamps that hold the cables. We remove the plastic stone guard and (as in the video) disconnect the power supply terminals inside the mudguard. Finally we connect the new ABS sensor and mount the stone guard and the rim with the attached pins.

Posted on 1 February 2020 by ScegliAuto

Video tutorial

Related tutorials

Mini (2001-2007 / R50, R52, R53) In this video we are shown how the indirect tire monitoring system works, which is used on the Mini R50/R53: being a car with less modern design, thi…
Mini (2014-2023 / F57, F54, F56, F55) Today's guide will show us the steps that will allow us to disassemble and replace the external air temperature sensor of the Mini Cooper. First, let…
Mini (2007-2014 / R57, R55, R56) In this guide, we will see the steps that will allow us to disassemble and replace the external air temperature sensor of the Mini Cooper. First of a…

    Frequently Asked Questions

    • Mini 2014-2023 - How much is the coupon for the Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Remove the Front Headlamp on a Renault Megane

Let's see how to remove the front headlamp on a Renault Megane. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Unscrew the headlamp securing bolts with a screwdriver, along with the associated clips, and extract the headlamp from its housing. Once the headlamp is removed (located at the rear of the headlamp), take it out, and you will find the bulbs with metal clips. Pull out the bulb holder from the headlamp and extract the damaged bulb using a screwdriver. Install the new bulb (always ensure it is the correct type and size) and insert the bulb holder back into the headlamp housing.

Watch the video!


by ScegliAuto

More videos