Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on a Mini Cooper

Model: Mini Mini R55, R57, R56 - Years 2007-2014
Part: Air filter

Before we start, we will have to open the front hood of our Mini Cooper. So let's start by unscrewing and removing the screws that secure the air filter cover. After that, we will have to remove the air filter cover itself. By doing so, we will have reached the air filter of our Mini Cooper. We then proceed by going to disengage and remove the air filter from its housing. When we have completed this last step, we will have successfully completed the disassembly. To fit the new filter, we will simply have to follow these short steps in reverse, and we will have completed the replacement.

Posted on 28 March 2021 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the air filter of the Mini Cooper R56
How to replace the air filter of the Mini Cooper R56
Mini (2007-2014 / R55, R57, R56) The engine air filter in your Mini Cooper R56 is a very important component and for this reason you must replace it periodically in order to preserve…
How to replace the Mini Cooper air filter
How to replace the Mini Cooper air filter
Mini (2014-2023 / F55, F56, F57, F54) In this short and simple guide we will see how to disassemble and replace the Mini Cooper engine air filter, following the instructions below. First …
Replacement of the cabin air filter of the Mini Cooper S
Replacement of the cabin air filter of the Mini Cooper S
Mini (2001-2007 / R53, R50, R52) In a few simple steps, we will see how to disassemble and replace the cabin air filter of the Mini Cooper S. First, we open the front passenger side …

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos