Do it yourself
Frequently asked questions about cars and motorcycles

How to Disable Start/Stop in a Mini Cooper?

Model: Mini Mini F56, F57, F54, F55 - Years 2014-2023
Part: Checks and maintenance

The Start & Stop system allows the car to automatically switch off during prolonged stops, such as waiting at a red traffic light. Often, the system can be too intrusive, necessitating its deactivation. In the Mini Cooper R55, R56, and R57, where Start/Stop is fitted, there is a button on the central console to the left of the ignition switch. Pressing it will illuminate an orange light indicating that the system is disabled. Unfortunately, the car will not retain this setting; it will reset to default, meaning the Start/Stop system will be active again. You will need to disable it each time you start the vehicle.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mini (2007-2014 / R56, R55, R57) Today, we will see in this video tutorial how to enable or disable the start&stop system on the Mini Cooper, as well as on the Countryman. First, let…
Mini (2007-2014 / R56, R55, R57) Following these brief and simple steps, we will see how to activate or deactivate the Start&Stop system of the Mini Cooper. First of all, we get into…
Mini (2014-2023 / F56, F57, F54, F55) To disable the Start&Stop system on a Mini Cooper, insert the key into the ignition switch and start the car. Once the engine is running, locate the …

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer
    • Mini 2014-2023 - When to service the Mini Cooper? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos