Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the remote control and replace the battery on the Mini Cooper F56

Model: Mini Mini F55, F56, F57, F54 - Years 2014-2023
Part: Key

In today's video tutorial we will see the step by step instructions to open the remote control and to replace the battery on the Mini Cooper S F56. First we take our remote control and remove the key from inside it; then we pry the slot with something thin to remove the lid, as shown in the video. At this point we are going to remove the battery contained inside, replacing it with the new one of the right type (in this case a 3V CR 2032); we just have to insert it in the correct direction and mount the rear cover, fixing it correctly.

Posted on 18 October 2021 by ScegliAuto

Video tutorial

Related tutorials

Open the remote control and replace the battery on the Mini Cooper F55 - F56
Open the remote control and replace the battery on the Mini Cooper F55 - F56
Mini (2014-2023 / F55, F56, F57, F54) In this video tutorial we will see how to remove and open the remote control, in order to replace the battery, on the Mini Cooper F55 and F56, in sim…
How to change the remote control battery on Mini Cooper F56
How to change the remote control battery on Mini Cooper F56
Mini (2014-2023 / F55, F56, F57, F54) In this guide we will see the instructions to be able to disassemble and replace the key remote control battery on a Mini Cooper F56, in simple steps…
How to replace the battery of the Mini Cooper F56 remote control.
How to replace the battery of the Mini Cooper F56 remote control.
Mini (2014-2023 / F55, F56, F57, F54) Let's see in this short tutorial the steps to replace the battery of a Mini Cooper F56 remote control, produced from 2014 to 2022. The first step is …

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos