Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
R50, R52, R53
- Years 2001-2007 In this video tutorial we will see how to remove and replace the lock module on the Mini One and on the Cooper, in the R50 and R53 versions. First we open the front door of our car and start by removing the door panel, unscrewing all the screws; once removed we can unscrew the screws of the lock module, which we find inside and on the sides of the door, as shown in the video. At this point we disconnect the handle cable to definitively remove the lock; we just have to replace it with the new one, following the video until the end for reassembly!
Posted on 9 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS on the Hyundai I20To reset the low tire pressure sensor, proceed as follows: sit in the driver's seat, turn on the ignition. On the steering wheel, among the right side controls, locate the control at the top left next to the "cruise" control. Press the control several times until the tire pressure situation is selected on the display. At this point, get out of the car and restore the correct pressure of the tire with low pressure. Then enter the passenger compartment again and the low tire pressure warning light will be off. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |