|
Do it yourself
| |||
| ||||
Resetting the Tyre Pressure Light on Mini Cars
Model: Mini Mini
F56, F55, F57, F54
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
Close all the car doors, insert the ignition key into the ignition and hold the start button for 3 seconds. Using the button at the end of the left stalk of the steering wheel (your left, when looking at the steering wheel), select the tyre pressure warning and press the reset button located on the instrument panel (see video). This very simple procedure also works for service lights or any other type. However, remember not to reset the lights before checking that there are no actual issues: for tyre pressure reset, check the pressure of each tyre.
Updated on 2 May 2026 by ScegliAuto
Related tutorials
Mini
(2007-2014 /
R57, R56, R55)
In today's video, you will see the instructions to reset the tyre pressure warning light on a Mini Cooper R50-R53. Before performing the reset operat…
Mini
(2001-2007 /
R50, R52, R53)
If the tyre pressure warning light on your Mini Cooper R52 stays illuminated on the instrument panel and you want to reset it manually, follow these …
Mini
(2017-2023 /
F60, Countryman2)
In this brief guide, we will look at the steps to reset the tyre pressure warning light on a Mini Cooper S. Before performing the reset, ensure all f…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Adjusting the Handbrake on a Kia Sportage
Today, learn how to adjust the handbrake on a Kia Sportage (2016-2022). Start by opening the armrest and removing the bottom with a small flat screwdriver as shown in the video. Next, remove the inner panel on the handbrake side to access its adjustment nut. Once done, use a spanner to turn the nut clockwise to increase the handbrake tension, or alternatively, loosen the tension by turning the nut anti-clockwise. After adjusting the cable tension, reassemble everything by following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.155
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |