Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Fog Light Bulb

Model: Mini Mini R60, Countryman1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

Replacing the front fog light bulb requires removing the headlamp, which is quite straightforward, to access the bulb holder located in the bumper. Once the front bonnet is open, disconnect the connector attached to the headlamp and unscrew the fixing pins of the headlamp to remove it from its housing.

At this point, you can access the rear of the fog light and proceed with replacing the bulb: it's a push-fit bulb holder and a T5 bulb. Once the bulb is replaced, reverse the process to reassemble the headlamp.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Replacing the Fog Light Bulb on a Mini One
Replacing the Fog Light Bulb on a Mini One
Mini (2007-2014 / R57, R56, R55) In this video, you will see how to replace the fog light bulb on a 2011 Mini One Diesel. The access to the bulb is located in front of the front whee…
How to Replace the Fog Light Bulb on a Mini
How to Replace the Fog Light Bulb on a Mini
Mini (2014-2023 / F55, F54, F56, F57) How do you replace the bulb in the rear fog lamp? Here’s how to change the bulb inside the Mini's fog lamp. Unlock the plastic at the bottom of the r…
Instructions for Replacing Front Headlight Bulb
Instructions for Replacing Front Headlight Bulb
Mini (2001-2007 / R53, R50, R52) This car model has the headlights integrated into the front bonnet rather than in the grille like other models. Once the bonnet is open, remove the r…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos