Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to replace the headlight bulb on the Mini Countryman

Mini - Video tutorial

Model: Mini Mini R60, Countryman1 - Years 2010-2016
Part: Light bulb
Operation: How to replace the headlight bulb on the Mini Countryman

If one of the headlight bulbs no longer works, you need to replace it so you don't have any safety and legal problems while driving. To do this you must first turn off the car engine and disconnect the battery so that you can do everything without any kind of risk. Then go to the side of the vehicle where the bulb to be replaced is located and lower down so that you have a complete view of the wheel cover. Locate the small plastic cap present and remove it completely. Unscrew the bulb by turning it counterclockwise and disconnect the connector. Finally, replace it with the new one and reconnect the connector. Finally, screw the cap removed earlier and attach the battery.


Posted on 31 July 2022 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Mini 2010-2016 - What does the EML warning light on the Mini Cooper indicate? Read Answer
    • Mini 2017-2023 - How do you replace the brake light bulb on the 2017 Mini? Read Answer
    • Mini 2014-2023 - What bulbs does the Mini Cooper have? Read Answer
    • Mini 2007-2014 - How much does a Mini Cooper reverse light bulb cost? Read Answer
    • Mini 2010-2016 - Spy with exclamation mark on Mini car? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos