Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the brake wear warning light on the 2017 Mini Cooper?

Model: Mini Mini F55, F56, F57, F54 - Years 2014-2023
Part: Warning light – error code

In order to reset the brake wear warning light on the 2017 Mini Cooper, you need to turn on the instrument panel by turning the key in the appropriate cylinder. Once the ignition has been turned on, it will be necessary to move to the menu on the display using the lever at the bottom right of the speedometer. You will have to reach the item that concerns the reset of the brake warning light: by holding down the same lever a loading bar will appear. When this loading bar is complete, the warning light will be properly reset and will disappear from the car's instrument panel.

Posted on 9 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Resetting the brake wear indicator light of the Mini Cooper
Resetting the brake wear indicator light of the Mini Cooper
Mini (2007-2014 / R55, R57, R56) Let's see the instructions on how to reset the brake wear indicator light on the Mini Cooper, following these simple steps. It may sometimes be neces…
How do you reset the brake wear indicator light on the Mini Cooper?
How do you reset the brake wear indicator light on the Mini Cooper?
Mini (2014-2023 / F55, F56, F57, F54) To reset the brake wear indicator light on the instrument panel of the Mini Cooper, you will need to turn on the instrument panel and then navigate t…
How do you reset the brake wear indicator light on the Mini Cooper S?
How do you reset the brake wear indicator light on the Mini Cooper S?
Mini (2007-2014 / R55, R57, R56) To completely remove the brake wear indicator light on the Mini Cooper S, you will need to turn on the instrument panel and then navigate to the menu…

How to Replace the Timing Belt on the BMW X3

Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove the screws to take off the upper panels. Now you need to remove the air filter cover from the engine. In any case, you will need to remove all obstructing parts until you reach the belt. In the diagram, you can see which pulley acts as the tensioner, so loosen it to remove the belt. Once the tension is off the belt, you can take it out and replace it without issues. Retrace the steps in reverse for reassembly of the various components.

Watch the video!


by ScegliAuto

More videos