Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlining of a Mini Cooper

Model: Mini Mini R53, R52, R50 - Years 2001-2007
Part: Checks and maintenance

To replace the headlining of the Mini Cooper, first remove all the obstructing pieces that prevent its removal: start by unscrewing the screws that secure the grab handles located above the doors. Once these are removed, unscrew the screws that secure the sun visors, completely removing them as well. By disconnecting the courtesy light units, you will be able to extract the headlining from the car through the boot after opening the tailgate. This way, you can insert the new headlining, securing it properly and reassembling all the parts removed earlier.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlining on a Mini Cooper?
How to Replace the Headlining on a Mini Cooper?
Mini (2001-2007 / R53, R52, R50) To replace the headlining on a Mini Cooper, remove all components that obstruct the headlining's removal: loosen all screws securing the internal rea…
How to Remove the Headlining of the Mini Cooper
How to Remove the Headlining of the Mini Cooper
Mini (2001-2007 / R53, R52, R50) Need to remove the roof lining panel of the car? Remove the headlining panel of the Mini Cooper. Remove the side handles of the headlining with a scr…
How to Remove the Headlining on a Mini Cooper
How to Remove the Headlining on a Mini Cooper
Mini (2001-2007 / R53, R52, R50) Learn how to remove the headlining on a Mini Cooper: start by removing the side handles of the headlining with a screwdriver, then remove the sun vis…

    Frequently Asked Questions

    • Mini 2014-2023 - Where is the rear washer fluid reservoir located on a Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer
    • Mini 2014-2023 - When to service the Mini Cooper? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos