Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the power window control module in the Mini Cooper?

Model: Mini Mini R50, R52, R53 - Years 2001-2007
Part: Power window switch

In this tutorial we can see how to disassemble the window lifter control module in your Mini Cooper, a very simple operation. First of all, disengage the upper frame of the dashboard, then unscrew the two side pillar screws with a Torx T40 key, remove it and repeat the operation on the opposite side. Once this is done, unscrew the fixing screws of the module in question, again using a Torx key but this time T20, then extract it from the housing and disconnect the rear connector. Finally, we assemble the spare part following exactly the reverse procedure.

Posted on 28 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure sensor of the Mini Cooper R52
How to reset the tire pressure sensor of the Mini Cooper R52
Mini (2001-2007 / R50, R52, R53) If the tire pressure warning light on your Mini Cooper R52 continues to stay on constantly on the instrument panel and you want to manually reset it,…
Removing the Mini Cooper S window lifter
Removing the Mini Cooper S window lifter
Mini (2001-2007 / R50, R52, R53) In this video tutorial we will see how to remove the window lifter mechanism on a second series Mini Cooper S. First we open the front door and we go…
Mini Cooper R53 steering wheel replacement
Mini Cooper R53 steering wheel replacement
Mini (2001-2007 / R50, R52, R53) In this video we see how to disassemble and replace the steering wheel of the Mini Cooper R53, in simple and quick steps. First of all we get on boar…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos