Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Window Regulator Sensor on a Mini Cooper

Model: Mini Mini R57, R56, R55 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
This video is currently unavailable

After performing maintenance on your Mini Cooper model R56, you may find that the window regulator sensors do not respond to commands. To reset them, sit inside the vehicle and turn on the instrument panel.

Then, press the button to raise the window for ten seconds until the window is fully up, then release it. Finally, press the same button to lower the window for another ten seconds and then release it. By doing this, you will have reset the window regulator sensors; if the problem persists, repeat the operation.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Mini (2007-2014 / R57, R56, R55) Resetting the central locking of the automatic windows may be necessary after replacing the car battery, especially on a 2009 Mini Cooper. To perform…
Mini (2007-2014 / R57, R56, R55) In this video, you can see where the engine oil pressure sensor is located in the Mini Cooper and how to proceed if you need to replace it, a very si…
Mini (2014-2023 / F55, F54, F56, F57) The steps in this guide will show you how to remove and replace the front brake pad wear sensor on the Mini Cooper. First, lift the vehicle and start…

How to Activate the Automatic Folding and Unfolding of the Wing Mirrors on the Jeep Compass

Follow these brief instructions to activate the automatic folding and unfolding of the external wing mirrors on the Jeep Compass. First, get inside the vehicle and turn on the ignition; then press the button located beneath the mirror glass adjustment to electrically open the mirror, as shown in the video. Pressing the button in the opposite direction will close the mirrors; by holding the button, the mirrors will open and close automatically!

Watch the video!


by ScegliAuto

More videos