Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the seatbelt of the Mini Clubman.

Model: Mini Mini F55, F56, F57, F54 - Years 2014-2023

In this guide, we will see the main instructions that will allow us to disassemble and replace the front seat belts of the Mini Clubman. First, we get into the car and start by removing the plastic side pillar, levering it off on the sides and removing it. Then, we proceed to unscrew the fixing screws of the bracket that secures the seat belt using a Torx screwdriver, also removing the top part, as shown in the video. At this point, we slide out and remove the seat belt, replacing it with the new one, and then reassemble everything!

Posted on 11 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake light bulb on the Mini Clubman
How to replace the brake light bulb on the Mini Clubman
Mini (2014-2023 / F55, F56, F57, F54) The guide shows how to replace the brake light bulbs of the Mini Clubman. After securing the vehicle and opening the rear doors, it is necessary to u…
Removing the Mini Clubman rear light
Removing the Mini Clubman rear light
Mini (2010-2016 / R60, Countryman1) In this video tutorial we will see how to remove the rear light of a Mini Clubman. First of all we open the two doors of the trunk and remove the sid…
How to Set the Time on the Mini Clubman
How to Set the Time on the Mini Clubman
Mini (2007-2014 / R55, R57, R56) Today we will discover the steps to change the time on the central display of the Mini Clubman. First, get inside the vehicle and start the instrumen…

    Frequently Asked Questions

    • Mini 2010-2016 - Where is the inflation kit located on the Mini Countryman? Read answer

BMW E90 E91 E92 E93: Replace Front Window Regulator

Replacing the front window regulator for BMW E90, E91, E92, and E93 models follows a similar procedure for all these versions of the Anglo-German automaker's vehicles. First, obtain a flathead screwdriver to remove the inner door panel. You need to take off the cover of the armrest structure that is snap-fitted. After that, you can reconnect the wiring and screw everything back in place. Finally, reinstall the panel and insert the window glass into the structure. Having someone assist you will make the process easier.

Watch the video!


by ScegliAuto

More videos